Introducing the TECH 1 Fastener.

Designed for the boater who does not always want his downrigger on display, or his dive tank rack sticking out. This is a classic look fastener system-AMERICAN MADE-from 316 Stainless steel. The bolt body is 5/8” and the bolt hole is 1/4”.

Compared to a rod holder the four bolts offer 4x the holding power and can take the place of a gimble mount.

Once these are installed in your configuration the appurtenance can be installed by placing a wrench on the fastener head and then tightening the 1/4” bolt. When your family and friends are going out boating with you simply remove the device from the fastener and you are left with a smooth, curved 1/8” protrusion.

Patent Pending.